2007 JE Design Audi Q7
| Price | -- | Production | -- | ||
| Engine | 3 liter V6 | Weight | -- | ||
| Aspiration | -- | Torque | 406 lb-ft | ||
| HP | 285 | HP/Weight | -- | ||
| HP/Liter | -- | 1/4 mile | -- | ||
| 0-62 mph | -- | Top Speed | -- | 
(from JE Design Press Release) Impressive racing SUV: Audi Q7 with wide body kit from JE DESIGN
Powerful wide body styling kit
Power boost for 3.0 V6 TDI to 210 kW/285 bhp
22-inch wheels and electronically lowered suspension
True to the motto of “everything or nothing”, the car styling 
			specialist from Leingarten,Germany, customizes the Q7 to create an 
			impressive car. In addition to the muscular wide body kit, which 
			makes this Audi look even more powerful, JE DESIGN is also offering 
			a performance enhancement, new rims and an electronically lowered 
			suspension.
For the large 3 liter V6 TDI, JE DESIGN is offering a power boost by 
			means of a modified engine management system. The Audi specialist 
			boosts the series specs of 171 kW/233 bhp and 500 Nm to 210 kW/285 
			bhp and 550 Nm, thereby lending this heavyweight ship superior 
			poise. The top speed has also increased accordingly from 210 to 219 
			km/h. The acceleration from 0 to 100 km/h is improved from 9.1 to 
			8.4 seconds. Needless to say, the modifications also include a TüV 
			parts certificate. Neither do clients have to worry about complying 
			with the EI regulations.
Muscular styling kit
JE DESIGN has already showed off its expertise in designing wide 
			body kits with the Seat Leon. This tuning specialist lends the Audi 
			Q7 greater width and an awesome-looking stance. The styling kit 
			includes headlamp lens caps, which lend the car a more aggressive 
			look. Fitting the impressive front spoiler helps to reduce lift. It 
			can also lend the Q7 greater prestige when overtaking. Also, it is 
			possible to equip this Audi SUV with a set of JE DESIGN twin 
			headlamps, which look far better than the original headlamp design. 
			JE DESIGN enhances the appearance of the rear end by equipping the 
			Q7 with a new tailgate skirt attachment, which incorporates 
			diamond-shaped openings on the right and left. In each of these 
			openings belongs a JE DESIGN dual tailpipe from made permanently 
			shiny, corrosion-resistant stainless steel. 
			
			
			The upper part of the rear end is also spectacular, which JE DESIGN 
			adorns with a wing spoiler tail fin including a C-pillar trim. A 
			feature that is sure to get heads turning. The same also applies to 
			the JE DESIGN fender flare kit "WIDE BODY", for which matching door 
			panels are also available. In front of the rear fenders, air inlets 
			lend the car a sportier look, without appearing “plump”. JE DESIGN 
			is offering the muscular look as a complete body-styling kit which 
			is cheaper than buying all single parts piece by piece.
Which rim?
Also when it comes to rims, JE DESIGN does not miss a thing. First 
			off, the tuning specialist offers its complete set of wheels JE 
			DESIGN “361” in the dimension 10 x 22 ET 20 (front) and ET 10 (rear) 
			fitted with size 295 / 30 R 22 Y tires. The rims are also sold 
			separately and are specially adapted to the wide body kit. Secondly, 
			JE DESIGN offers a complete set of wheels AZEV “R-Wheel” in the 
			dimension 10 x 22 ET 50 with size 295 / 30 R 22 Y tires. These rims 
			are also sold separately . For rims with a wheel offset of 50, JE 
			DESIGN recommends using its aluminum track extensions, which add an 
			extra 60 mm width on the front axle and as much as 80 mm on the rear 
			axle.
			
			The fine figure of the JE DESIGN Q7 is rounded off by an 
			electronically lowered suspension, which the car customizer from 
			Leingarten offers for cars with air suspension and which finally 
			helps the JE DESIGN Q7 to morph into a true racing SUV.
			
			Further information on the extensive tuning range for vehicles from 
			the Volkswagen group is available from JE DESIGN at
			www.JE-DESIGN.de



