2012 Prior Design Audi R8 GT 850 Widebody
Price |
-- |
Production |
-- | ||
Engine |
4.2 liter V8 |
Weight |
-- | ||
Aspiration |
natural & supercharged |
Torque |
-- | ||
HP |
475 & 565 hp |
HP/Weight |
-- | ||
HP/Liter |
113.1 hp & 134.5 hp per liter |
1/4 mile |
-- | ||
0-62 mph |
-- |
Top Speed |
-- |
(from Audi Press
Release) GT850-Widebody: GT3-looks for the Audi R8!
The Audi R8 doubtlessly cleared the way for the Ingolstadt car
constructors to reach the sports car Olympus. Whether in the "small"
V8 or the V10-version, the R8 convinces both with a noticeable look
and spectacular driving performance. It plays two important trumps
perfectly: its closeness to group brother Lamborghini Gallardo and
its exotic role between the huge armada of Porsche 911 models.
The development of a new look for the R8 is certainly no easy thing.
However, the specialists at Prior-Design took lots of time for it
and now present a truly impressive result. The Kamp-Linfort tuners
turn the "standard" R8 into a brutal PD-GT850 racing style car. Its
outfit would fit the der Nürburgring Nordschleife as well. The front
was entirely revised. A front apron with widenings and an integrated
carbon spoiler was installed. Additionally, two air inlet covers
were integrated that are applied with two carbon struts each. The
motor cowl has an integrated air outlet with four lamellae. A set of
new front mudguards ensure a much wider look. Prior-Design improved
the air circulation along the vehicle sides by installing
aerodynamically formed side sills that also optionally light the
vehicle underbody with four LED lamps. The tuners offer the wide
side cover in a carbon fibre alternative as well.
The tail area could have
been taken off of a GT3-racing car. A massive tail spoiler and a
tail bumper with lateral air inlets, as well as a Carbona
application put a lot more power onto the rear axle. A set of tail
widenings produces a powerful stance. The 24,900 Euros construction
kit (plus paint job and assembly) for the R8 is completed by a
stylish roof scoop.
In addition to the car body construction kit, Prior-Design also
offers the matching wheel/tyre combination for the R8 now: a 3-part
ADV1 Concave-wheel in 20 inch with Continental tyres in 265/30R20
and 325/25R20. The entire wheel set is at about 9,900 Euros. For
another 2,699 Euros, Prior-Design also offers a special sports
exhaust system with flap control. For the "small" 4.2 FSI, the power
can be raised from 420 to 475 hp if the customer wishes (5,900
Euro). If you need more steam than that, use the compressor
conversion with power upgrade to reach a full 565 hp.
By the way: If you don't like your car quite that wide, Prior-Design
is currently developing an additional "narrow" version of the e Audi
R8-Aerodynamikkits.
All other facts, as well as price and delivery information, are
available from:
Prior
Design
Robert-Bosch-Straße 11
47475 Kamp-Lintfort
Phone: 0049 28 42/ 97 57 00
Fax: 0049 28 42/ 97 57 010
www.prior-design.de
Email: info@prior-design.de